INSTRUCCIONES DE USO
BLUESKY GEL POLISH 3 PASOS

PASO UNO.
  1. Agita muy bien la botella antes de usar.
  2. Sobre tus uñas limpias, lima ligeramente con Nail Buffer y aplica el Acid Free Primer para nivelar el pH de las uñas.
  3. Aplica una ligera capa cubriendo toda la superficie con Base Coat.
  4. Cura en tu lámpara UV/LED por 60s.
PASO DOS.
  1. Aplica el color de tu elección de Gel Polish (Efecto o decoración)
  2. Cura nuevamente en tu lámpara UV/LED por 60s
PASO TRES.
  1. Aplica el Top Coat o terminado deseado (Matte Top Coat).
  2. Cura nuevamente en lámpara LED/UV por 60s.
  3. Limpia tus uñas con las toallitas Cleanser Wipes.
  4. Por último aplica Cuticle Oil, como hidratante para el cuidado de la cutícula.

CÓMO REMOVER EL GEL BLUESKY

  1. Lima suavemente el gel para romper el sello y remover el brillo.
  2. Coloca algodón húmedo con acetona sobre la uña.
  3. Envuelve la uña con aluminio por 10 minutos y remueve con un palito de madera.
  4. Con una lima de uña natural lima suavemente.

INSTRUCCIONES DE USO
OULAC GEL POLISH 3 PASOS

PASO UNO.
  1. Agita muy bien la botella antes de usar.
  2. Utiliza un limpiador/acetona para limpiar la uña.
  3. Lima la uña suavemente y déjala limpia y seca.
  4. Aplica una capa delgada de Oulac Base Coat, y cura en tu lámpara UV/LED por 60s.
PASO DOS.
  1. Aplica una ligera capa de color y cura en tu lámpara UV/LED por 60s.
  2. Repite este paso una vez más.
PASO TRES.
  1. Aplica una capa de Oulac Top Coat y cura en tu lámpara UV/LED por 120s.

CÓMO RETIRAR OULAC GEL POLISH

  1. Lima suavemente el gel para romper el sello y remover el brillo.
  2. Coloca algodón húmedo con acetona sobre la uña.
  3. Envuelve la uña con aluminio por 10 minutos y remueve con un palito de madera.
  4. Con una lima de uña natural lima suavemente.

INSTRUCTIONS FOR USE
BLUESKY GEL POLISH 3 STEPS

STEP ONE.
  1. Shake well the bottle before use.
  2. Over your clean nails, file gently with Nail Buffer and apply the Acid Free Primer to level your nails’ pH.
  3. Apply a light layer of Base Coat covering all the nail.
  4. Cure your nails with the UV/LED Lamp for 60s.
STEP TWO.
  1. Apply your selected Gel Polish Color
    (Effect or Nail Art).
  2. Cure your nails again with the UV/LED Lamp for 60s.
STEP THREE.
  1. Apply Top Coat or any finishing of your choice
    (No Wipe Velvet Top Coat).
  2. Cure your nails with the UV/LED Lamp for 60s.
  3. Clean your nails with the Cleanser Wipes.
  4. Finish by applying Cuticle Oil to hidratate your nails cuticle.

HOW TO REMOVE BLUESKY GEL

  1. Gently file the surface of the gel polish to break the seal and remove the shine.
  2. Place cotton wool saturated with remover over the nail.
  3. Wrap up the nail for 10 minutes then remove gel with a wood stick.
  4. Use a buffer to lightly buff surface of the nail.

INSTRUCTIONS FOR USE
OULAC GEL POLISH 3 STEPS

STEP ONE.
  1. Shake well the bottle before use.
  2. Use the cleanser/acetone to wipe the nail.
  3. File the nail smooth and keep it clean and dry.
  4. Brush a thin layer of Oulac Base Coat, curing in 60s by UV/LED Lamp.
STEP TWO.
  1. Brush a thin layer of Oulac color, curing in 60s by UV/LED Lamp.
  2. Repeat this step one more time.
STEP THREE.
  1. Brush a layer of Top Coat, curing in 120s by
    UV/LED Lamp.

HOW TO REMOVE OULAC GEL POLISH

  1. Gently file the surface of the gel polish to break the seal and remove the shine.
  2. Place cotton wool saturated with remover over the nail.
  3. Wrap up the nail for 10 minutes then remove gel with a wood stick.
  4. Use a buffer to lightly buff surface of the nail.